James Burn EX610D Duplex High-Speed Automatic Binding Punch
- 18” Feed table capacity
- Punches 125,000 sheets per hour
- Increase production and run all-day without down-time
- Choose your exit reception option
- 90 Day Manufacturer Warranty
Description
The James Burn EX610 Duplex with Board Feeder is the only automatic punching machine which offers a duplex reception option. This unique feature allows the machine to process punched paper and cardboard on two different reception systems. With the James Burn EX610D Duplex automatic binding punch, you can punch both mixed stocks and cardboards up to 2.5 mm thick, without having to run them separately.
It comes with two exit reception options: either a pair of pile high stackers, or one high pile stacker and one conveyor. The pile high stacker will collect the chipboard sheets, while the other stacker or conveyor collects your standard punched paper. The main difference inside the machine is that the chipboard does not go around the turnover device and must exit through the stacker. The pile high stackers have rolling castors, so they are easily moved to the binding station of your choice (consider the BB50H wire binder or the CB30QS automatic coil inserter). The conveyor creates a shingled stack for easy grabbing and binding of sets.
Duplex Receptions Include:
- A standard high pile or conveyor reception for inner sheets and standard weight covers.
- A straight high pile reception unit that is dedicated to card-board applications. As the board does not run through the turnover drums, this guarantees a perfect flatness without any curling. (Note: A board feeder will have to be added to this equipment.)
The configuration changeover is very easy and both reception devices can be disconnected. The mechanical device is operated by a handle; the electrical device is driven by an on/off switch.
Advantages:
- Designed to punch both paper and cardboard, the EX610 with the Duplex Reception enhances the profitability of a print finishing workshop.
- Improves productivity by 80% as the operations of board punching are currently made on manual machines.
- The adjustments for board and paper punching are identical, which helps reduce the setting time as well as the requirements in operator training.
- Perfect alignment of holes between cardboard covers and inner sheets facilitates wire insertion and speeds up binding operation by reducing possible downtime due to mis-alignment.
- It saves floor space which can be used for other applications (e.g. for binding) and will provide print finishers with increased production capacity and improved material work flow resulting in a better profitability.
EX610DA Punching Dies:
Browse punching dies available or ask about custom-made dies for more unique punching patterns.
- Spiral Binding / Plastic Coil
- Wire-O Twin-Loop Wire Bindings
- Plastic Comb
- Velo Binding
- Three-Hole for Ring Binders
- Custom dies made to your exact specifications
- All dies can be sharpened with our Express Die Sharpening Service
*May vary depending on sheet size, paper stock, operator, and other factors. **Tabs cannot be run while in double-action mode
Specifications
Item # | 04JBEX610D-GRP |
---|---|
Manufacturer | James Burn |
Suggested User | Industrial |
Operation: Punching | Electric |
Compatible Supplies & Accessories | EX610 Series Punching Dies EX610 Series Tab Pusher (Item# 04JBEX610TABP) EX610 Series Nail Hole Punching Kit (Item# 04JBEXNHPK) EX610 Series Bottom Feed Board Unit (Item# 04JBEX610BF) |
Power Voltage | 220/380v Three Phase 60 Hz (20A) 3Kw |
Dimensions | 110" W x 40" D x 54" H |
Setup Time | 15-20 Minutes, Depending on Operator |
Die Change Time | Less than 2 Minutes |
Paper Size | 4-1/4" x 3-7/8" up to 24" x 20-3/4" |
Accepted Paper Type | No Stock Limitations |
Feed Table Capacity | 18" Thick Stack |
Selectable Speeds | Adjustable with Hand Wheel (30 Cycles / Min to 120 Cycles / Min) |
Speed* | Up to 125,000 Sheets per Hour |
Sheet Pickup | Top of Pile Positive Sheet Pickup |
Maximum Punching Thickness | 2.5 mm |
Pick Thickness | Up to 2.5 mm |
Air Compressor Requirements | 2 CFM at 40 PSI |
Control Panel | No Control Panel |
Jogger | 4-Sided Jogger |
Die Sharpening Available | Yes, Express Die Sharpening Service is Available |
Disengageable Die Pins | Yes (For Common Paper Sizes, Varies by Die) |
Die / Tool Storage | No Die Storage On-Unit |
Hands-Free Operation | Yes |
Monthly Volume / Duty Rating | Continuous Use (Monthly Volume Dependent on Operator and Shifts) |
Special Training Required | Minimal Training Required |
Product Weight (lbs) | 3155 |
Shipping Weight (lbs) | 3479 |