Logan XTC2001 COS-Tools V-Groove Cutter
37.190000
NewCondition
InStock
Logan XTC2001 COS-Tools V-Groove Cutter
Item #: 04LGNXTC2001
Brand:
Logan
Log in for pricingor
- Cuts V-grooves in suitable Cosplay materials to perfection
- Features include adjustable blade depth, quick change blade clips, magnetic blade slot, on-board blade storage drawer and six extra blades.
- Use with COS-Tools XT3001 Channel Rail, Logan Adapt-A-Rule or Team System to maximize productivity
- Use replacement blades WC-5 or WC-20.
Description
The COS-Tools XTC2001 V-Groove Cutter cuts V-grooves perfectly in suitable Cosplay materials. It is featured with an adjustable blade depth, quick change blade clips, magnetic blade slot, on-board blade storage drawer and six extra blades. To maximize its productivity, use it with COS-Tools XT3001 Channel Rail, Logan Adapt-A-Rule or Team System. The COS-Tools XTC2001 V-Groove Cutter uses replacement blades WC-5, WC-20.
Features:
- Features include adjustable blade depth, quick change blade clips, magnetic blade slot, on-board blade storage drawer and five blades.
- Cuts V-grooves in suitable Cosplay materials to perfection
- Use with FoamWerks Channel Rail, Logan Adapt-A-Rule or Team System.
- Use replacement blades WC-5 or WC-20.
- 90 Days Manufacturer's Warranty
Specifications
| Item # | 04LGNXTC2001 |
|---|---|
| Brand | Logan |
| Replacement Blades | WC-5 or WC-20 |
| Warranty | 90 Days Manufacturer's Warranty |
Videos
Logan FoamWerks Cutters: WA-8001
Transcript:
To use the FoamWerks circle cutter. First, install the blade, loosen the knob and remove the beam from the center of the machine. On the end of the beam, you will find the blade holding knob and the blade cover. Remove both of these, place a single blade onto the blade block, going the same direction as the imprint on the plastic. Then replace the blade cover. Now replace the beam into the center of the machine. To determine the diameter of the circle to be cut, loosen the knob and find the scal...
Read More
To use the FoamWerks circle cutter. First, install the blade, loosen the knob and remove the beam from the center of the machine. On the end of the beam, you will find the blade holding knob and the blade cover. Remove both of these, place a single blade onto the blade block, going the same direction as the imprint on the plastic. Then replace the blade cover. Now replace the beam into the center of the machine. To determine the diameter of the circle to be cut, loosen the knob and find the scale on the side of the beam. Use this scale to set the diameter of the circle to be cut. When using the FoamWerks circle cutter, always see you have a scrap piece of foam board under the foam board you are cutting, determine the center of the circle by making a reference mark. Now place the FoamWerks circle cutter with the centering pin on top of the mark you made. To operate the circle cutter, turn the handle to the right and listen for the blade as it cuts through the foam board and slightly into the scrap foam board underneath. When finished, always remember to rewind the tool before setting it aside. The foam board circle cutter can cut circles from one inch up to six inches.
Reviews
Write Your Own Review
Frequent Asked Questions
Submit a New Question
