Replacement Punch Pads for FP1XLS Drill 3 /Pack
- Designed for the FP-1XLS Paper Hole Punch Machine
- Size (Diameter): 1/4", 3/16", 3/8"or 5/16" hole
- Paper Drills Capacity: 1"
- Quantity: 1
How to Change the FP-1XLS Drill Bit:
① Use the allen wrench that was included with your machine to loosen the drill bit, and remove.
② Place your new drill bit on, and tighten the screw with the allen wrench. That's it! Easy changeover from size to size, or replacing worn out drill bits is so fast and easy, you can do it in just a few seconds.
How to Adjust the FP-1XLS Drill Bit Height:
You should always ensure the height of the drill bit is set properly before you begin, especially after you change out the drill bit. To adjust the height of the drill bit, thereby adjusting how deep it will punch, simple rotate the stroke adjuster on the top of the machine by twisting it right or left. The optimum drill bit height setting will create a 0.5mm depression into the plastic pad when pressed down.
|Manufacturer||SPC, Co. Ltd|
|Compatible Equipment||FP-1XLS Paper Drill Hole Punch|
|Capacity: Paper Drills||1"|
|Shipping Weight (lbs)||1.25|