MBM GoCrease SEMI 1 /Each

With the MBM GoCrease™ SEMI your print shop or large office will be able to set up the programmable touch screen and walk away while it processes your pages. This versatile machine will accomplish creasing in one of three different widths including 0.04", 0.05", or 0.063" with up to 15 total creases per sheet. It can also create 9-tooth perforations with the same 15 perf per sheet capabilities, and work with sheet sizes ranging from as small as  3 ⁹/₁₀" wide up to as large as 18" wide and about 39" long with hits as close to each other as 0.07" or as far apart as 39.3". It has five pre-programmed and measured settings for popular fold types, and features five additional programmable memory settings that you can customize, allowing for quick recall of frequently run jobs. The touch screen walks you through set up before each job, and can be set to eight different languages including English, Spanish, French, German, Italian, Russian, Greek, and Czech. The MBM GoCrease™ SEMI is internationally-known as one of the most popular and revolutionary machines for this reason, and for the versatile functionality that it offers.

In addition to being versatile, the GoCrease™ SEMI by MBM Corporation uses a unique anvil-style pressure tool for both creasing and perforating, which allows for the least damage to your sheet by keeping the paper fibers and printed inks in-tact. This distinctive pressure style yields a perfect image from edge to edge, making the GoCrease™ one of the best creasing and perforating machines on the market, and producing the most professional and high-quality finish. With the capability to run at speeds as fast as 1,500 sheet per hour*, and the quick change-over for different creasing widths and between the creasing and perforating tools, the GoCrease™ SEMI is a smart buy for any print shop or large office with higher volume daily needs.

 Pre-Programmed Settings for Popular Folds:

• Half Fold (1/2 Sheet)
• Letter Fold (1/3 Sheet)
• Quarter Fold (1/4 Sheet)
• Gate / Double Parallel Fold (1/4 Sheet)
• Book Cover Fold

 How to Change GoCrease™ SEMI Crease Widths:

1. Pull out the creasing tool and rotate it to the desired width.
2. Place the tool back into the machine.

How to Change GoCrease™ SEMI Creasing and Scoring Tools:

1. Make sure the machine is unplugged.
2. Lift the cover and remove the two side screws and pull the shaft up with the leading wheels.
3. Remove the screws on the tool and carefully pull out the tool.
4. Place the new tool into the machine and replace the screws (do not tighten them too much).
5. Replace the cover.

* Operating speed may vary depending on paper size and type, number of creases or perforations per sheet, etc.