James Burn Wire-O Bind 3000S Semi-Automatic Binder 1 /Each
- Speed up to 1,000 documents per hour.
- Document thickness - Up to 1-1/8" (28 mm)
- Allows all types of Wire-O® binding styles for a wide variety of documents
- Wire-O® size changeovers are done in 2-5 minutes including spool replacement.
Description
Take advantage of the James Burn Wire-O Bind 3000S Semi-Automatic Binding Machine's exceptional productivity. This semi-automatic binding machine offers unparalleled versatility when used with Wire-O spools or cut lengths. By allowing settings for sizes and formats to be programmed in and altered without the need for manual changes, the distinctive touch screen digital keypad simplifies setup and operation. The document can be correctly aligned without the use of stops or paper guides by sending it to the closing unit. This wire binding machine automatically feeds, chops, and positions the wire element so that it is prepared for insertion. Because of this automatic setup, waste is also reduced.
Because of its versatility, the WOB3000S can bind a variety of papers with flush cut or overlapping covers as well as larger index tab paper stocks. The task is completed quickly and with little effort thanks to a pace of up to 1,000 documents per hour. Even simple tasks like switching the size of the Wire-O connector and replacing spools can be finished in 2 to 5 minutes.
The machine's ergonomic design, which offers a spacious table-top workplace, considerably reduces fatigue. This useful tool is transportable and comes with easy-rolling rollers. Use the James Burn Wire-O Bind 3000S Semi-Automatic Binding Machine to automate wire binding for a quick and effective binding procedure.
Features:
- Versatile: By employing Wire-O® spools or cut lengths, it is possible to use all forms of Wire-O® binding techniques for a variety of documents with flush cut or overhanging covers as well as extended index tabs.
- Effective: One hour can be used to handle 1,000 pages. Waste can be decreased by using an automated setup. There are three additional plug-and-play reception kinds that can support a variety of workflow scenarios.
- User-friendly: No mechanical changes are required because all size and format sets are instantaneously customizable using a "touch screen" digital keypad. The spool can be replaced, along with the size of the Wire-O, in 2 to 5 minutes.
- Thanks to adaptive design, a large tabletop workstation reduces operator fatigue. Because of its caster wheels, it can fit in any location without the need for air.
- Safety: Components created for the safest operation.
Specifications
Item # | 04JBWOB3000S |
---|---|
Brand | James Burn |
Manufacturer Part Number | 04JBWOB3000S |
Max document size | 12" B.E. (300mm) x 13" (330mm) |
Min document size | 1.5" B.E. (38mm) with spools or 2.8" B.E (71mm) x 1.5" (38mm) with cut lengths |
Document thickness | Up to 1-1/8" (28 mm) |
Cycle speed | Up to 1 000 documents/hour |
Wire-O® sizes | 3:1 Pitch 1/4" to 9/16" & 2:1 Pitch 5/8" to 1-1/4" |
Oversize covers | Possible |
Skip binding | 1 with 2 loops min. (Only in spool mode) |
Reception capacity with standard tray | up to 2" (50mm) |
Optional adjustable reception bin | up to 7" (180mm) |
Optional conveyor reception | up to 50 books 3/8" (10 mm) thick |
Spool change over | In less than 5 minutes |
Control panel | Touch screen |
Format set up | Fully automatic |
Format set up time | less than 2 minutes |
Power | 110/120 V (60Hz) 1ph |
Machine dimensions with standard reception ( L x W x H) | 8'x 2' 10"’x 5' (2250 x 850 x 1540 mm) |
Net weight | 550 lbs. (250 kg) |
Videos
James Burn Wire-O Bind 3000S Semi-Automatic Binder
The Wire-O Binder automatically cuts the wire to length, positions it for insertion into the document by the operator and then transports the document to a patented closing unit. It offers outstanding productivity with output rates of up to 800 books per hour.
This versatile machine finishes all three to one and two to one pitch Wire-O in sizes from o... Read More
The Wire-O Binder automatically cuts the wire to length, positions it for insertion into the document by the operator and then transports the document to a patented closing unit. It offers outstanding productivity with output rates of up to 800 books per hour.
This versatile machine finishes all three to one and two to one pitch Wire-O in sizes from one quarter inch to one and one quarter inch wire.
Simple to operate, all size and format setups are instantly adjusted with the user-friendly 'touch screen' electronic controls. Wire-O size changeovers can be done in less than five minutes.
The Wire-O Binder 3000s can offload completed documents using an optional book stacker or the popular conveyor system for larger production runs.
The versatile Wire-O Binder finishes a wide variety of documents, including flush cut and overhanging covers, as well as extended index tabs.
The ergonomic design is operator-friendly with large table-top workstation to help reduce fatigue. The machine will cycle with either a push-button or foot pedal control.
With standard one hundred ten-volt power requirements and easy to move casters the Wire-O Binder can be easily placed where it is needed.
The 3000S Wire-O Binder is the perfect finishing solution for today's modern in-plant, digital and 'on-demand' printing environments, where ease-of-use, versatility and productivity are a must.
Reviews
Expert Reviews
James Burn WOB3000 Staff Review
The James Burn WOB3000 is the best semi-automatic binding machine choice for your document finishing requirements. Whether your business requires the on-demand preparation of presentations, calendars, marketing materials, notebooks, or manuals.
The Best Things About the James Burn WOB3000
James Burn's Wire-O binding machine is perfect for binding books, official papers, and calendars in places like offices, classrooms, and high-volume production lines. You can do more with the help of this semi-automatic binding machine, up to 1,000 papers per hour in fact. The LCD touchscreen's setup is incredibly straightforward, allowing you to easily select work preferences and sizes. There is no need for manual tweaking because of the touch screen's capacity to adapt to the settings. This wire binding machine will feed, cut, and position the wire element in the appropriate location for insertion before sending the document to the closure unit without the need for manual stops or paperer guides.
Things You Should Consider Before Buying the James Burn WOB3000
The semi-automatic binding machine WOB3000 is ideal for business use. It weighs 550 pounds and has lockable caster wheels for mobility. The WOB3000 can be overwhelming if your business is small, you have limited space, or your need for binding isn't great. But you can also get the "big brother," the James Burn BB520P, if you want to boost your output. It can bind between 1,000 and 3,000 documents every hour.
The Bottom Line — Is the James Burn WOB3000 a Good Buy?
James Burn creates, produces, and markets a wide selection of high-quality punching and binding equipment. James Burn’s WOB3000 binding machine is the ideal option for your document finishing needs, regardless of whether your job entails the on-demand preparation of sales proposals, presentation reports, promotional materials, or the high-volume production of commercial calendars, photo albums, diaries, notebooks, or manuals.
If you have any questions or need help choosing the best product for your specific needs, please don't hesitate to contact us at 800-631-3572. We would love the opportunity to discuss your unique situation and help you find the ideal solution.
— — —
Our staff reviews are written by various experts across the company, with decades of experience not only in the industry itself, but at Spiral. Our goal in these reviews is to give you an honest, hands-on look at our products, giving you unique insight and helping you make the best buying decision for you and your business.