2mil PSA High Gloss Cast Vinyl EZ Apply Adh.-Latex/Solvent/UV [2 Mil, Gloss, White, 30" x 150'] 1 /Roll

2mil PSA High Gloss Cast Vinyl EZ Apply Adh.-Latex/Solvent/UV [2 Mil, Gloss, White, 30" x 150'] 1 /Roll
0 NewCondition InStock

2mil PSA High Gloss Cast Vinyl EZ Apply Adh.-Latex/Solvent/UV [2 Mil, Gloss, White, 30" x 150'] 1 /Roll

Item #: 87KCGWAR230150
Brand: Spiralbinding
or
-
+

Description

This premium 2 mil High Gloss Cast Vinyl PS Adhesive & Air Release Liner has a gray positionable adhesive back and a 90 lb. air release liner for use with Solvant, Latex and UV Printers.

Features:

  • Premium PSA Cast White Vinyl
  • The textured air release liner has embossed pattern that produces channels in the adhesive that will help air to escape during application.
  • Up to 5 year outdoor durability
  • Perfect for vehicle wraps, decals and markings over flat, corrugated, riveted or seamed surfaces.
  • Point of purchase, trade show displays and window graphics
  • Can be used for interior and exterior signage
  • Compatible with OEM Solvent and Mild Solvent Ink
  • Chemical Resistance: Resistant to alkalies, mild acids, most petroleum based oil, grease and aliphatic solvent and salts.


Note** Typical Performance Values: The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)

Specifications

Item #87KCGWAR230150
ManufacturerSpiral
Manufacturer Item #87KCGWAR230150
AdhesivePositionable Gray Tint
Film2 mil Cast Viny (wound print side out)
Liner90 lb. Polycoated Two Side Air Release Liner
FinishGloss White
Gloss Level90 avg. @ 60°
Durability7 Years Outdoor - unprinted
Minimum Application+ 55° F - Minimum for Substrate
Service Temperature Range-40° F to +180° F
Dimensional Stability0.01 in. (48 hours @ 150° F)
Typical Adhesion Values180° Peel Test
SubstrateStainless Steel / 1.9 lb./in - 24 hrs
Shelf Life1 yr from ship date, stored in proper conditions - 70° F & 50% relative humidity

Reviews

Write Your Own Review
You're reviewing:2mil High Gloss White Cast Vinyl with EZ Apply Pressure Sensitive Adhesive - Latex/Solvent/UV (1 Roll)
Your Rating

Frequent Asked Questions

Submit a New Question