Save more with MBM 6660 VR Cut Package. This package includes MBM 6660 VR cutter, side table, knife, and cutter sticks (6pk). The MBM Triumph 6660-VRCut 25-1/2" Automatic Programmable Paper Cutter is an automatic machine suitable for a wide range of paper cutting applications. Designed with efficiency in mind, the unit provides automatic clamping paired with an easily programmable powered back gauge. The patented "Easy-Cut" blade activating bars ensure a safe and accurate cutting operation, while the IR light beams enhance the safety features further. Easy to use, the 6660-VRCut has multilingual touch pad controls and can store up to 99 jobs with 99 steps each (up to 15 repeat cuts can be integrated as a single step). This machine also comes with the VRCut Software that offers an ingenious way to automatize and streamline your workflow while eliminating errors from the cutting process.
Programmable cutter with automatic clamp, power back gauge, digital touchpad, and IR safety light beams on front table.
Ergonomic, 37 inch working height.
VRCut is a groundbreaking software solution designed to automate the cutting workflow by promoting an efficient and error-free cutting process from start to finish. VRCut intelligently bridges the gap between pre-press and the finishing process, allowing operators of any experience level the ability to cut with confidence on select Triumph cutters.
Electric blade and clamp drive
Electric back gauge drive with touchpad for easy programming.
Digital measurement display (cm or inches) with multilingual operator guidance, accurate to 1/10 mm or 1/100 inch.
Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step).
Pre-programmed for standard paper sizes.
Memory key for repeat cuts.
Automatic SET function for reference measurement and EJECT function for pushing out paper.
Self-diagnostic system with error indication on display.
Electronic back gauge control with variable speed control for manual back gauge setting.
Bright, LED optical cutting line.
3-step, LED front table illumination
Adjustable, spindle guided back gauge with narrow separations and plastic gliders.
Dual side guides on front and rear tables.
High quality, German steel blade.
Solid steel blade carrier and adjustable blade guides.
Includes stand with storage shelf, easy-access tool holder, and paper blocking tool.
Optional side tables increase work surface.
UL and C UL approved.
Comprehensive SCS™ Safety Package:
An IR light beam safety curtain on the front table
Automatic blade and clamp return from every position
Disc brake for instant blade stop
Blade changing device covers cutting edge of blade
Blade depth adjustment from outside of machine
Blade and cutting stick can be changed without removing covers.
Manufacturer Part Number
Length behind blade
115 V, 60 Hz (20 amp dedicated line required)
Dimensions (D x W x H)
48 x 39 x 51 (61 1/2 W with side tables)
Shipping Weight (lbs)
775 (796 with side tables)
This item ships via Truck (Common Carrier). It is the responsibility of the Consignee (receiver) to remove the product from the truck. If you do not have a loading dock or any other means to lift the freight off the truck and/or you need assistance bringing the product inside of your location please call (866) 537-2244. Click here for full details.
MBM VR Cut Models – How to Use the Control Panel
Transcript:Speaker 1: Today we're going to be demonstrating the VR Cut Controller. The VR Cut Controller will automatically guide the operator with a visual interface. To start the job, we're on a Triumph 5260. We click the start button and read the bar code on the job layout. The job layout was created in VR Cut Impose, and it automatically calls in the appropriate template. It gives the operator an option to call in the actual artwork. And that way you can actually see the- VR Cut Controller: Jog to s...Read More
Speaker 1: Today we're going to be demonstrating the VR Cut Controller. The VR Cut Controller will automatically guide the operator with a visual interface. To start the job, we're on a Triumph 5260. We click the start button and read the bar code on the job layout. The job layout was created in VR Cut Impose, and it automatically calls in the appropriate template. It gives the operator an option to call in the actual artwork. And that way you can actually see the- VR Cut Controller: Jog to squares down. Speaker 1: -artwork that you're heading. The backgauge moves to the first position. VR Cut Controller: Ready to cut step one. Speaker 1: The operator places the document into the cutter to ensure that it can cut. You'll see it will have the visual marker on the paper,- VR Cut Controller: Rotate 90 clockwise. Speaker 1: -as well as on the screen. Now they have the audio command. Visual commands to rotate the paper. Also, it alines with cut two- [crosstalk 00:01:02]. VR Cut Controller: Scan two. Speaker 1: -on the paper and on the screen. You'll see lid trash can open to indicate that there's a scrap to throw away. VR Cut Controller: Rotate 90 clockwise. Speaker 1: We rotate the paper- VR Cut Controller: Ready to cut step three. Speaker 1: -throw away the scrap. VR Cut Controller: Ready to cut step four. Speaker 1: And you'll notice in this case that the table on the- VR Cut Controller: Ready to cut step five. Speaker 1: -screen has the- VR Cut Controller: Rotate 90 clockwise. Speaker 1: -has the work table. Now you take the page off the work table, rotate it, place it onto the cutter. VR Cut Controller: Ready to cut step six. Ready to cut step seven. Speaker 1: No rotation here. Now you'll notice the two pieces move over to- VR Cut Controller: Ready to cut step eight. Speaker 1: -the pallet indicating they are finished. This edge rips off the bleed edge. VR Cut Controller: Job complete. Speaker 1: And now the final two are push forward, and the job is complete.
Write Your Own Review
Frequent Asked Questions
Submit a New Question
Sign up for Exclusive Promotions and Industry News Trends
Success! You're now on the list. You'll start receiving Exclusive Email Offers shortly.