Microporous Polypropylene For Aqueous Ink Jet Printers
0
0
6
Microporous Polypropylene For Aqueous Ink Jet Printers
Brand:
Spiral
- Bright white, water resistant, recyclable polypropylene film with a microporous coating for instant drying.
- Produce spectacular, brilliantly colored graphics that will last up to one year outdoors without lamination.
- Material: Polypropylene
- Caliper/Gauge: 8 mil
Quote Below
Description
8 Mil Gloss Microporous Polypropylene film is a bright white, water resistant, recyclable polypropylene film with a microporous coating for instant drying. It lets you produce spectacular, brilliantly colored graphics that will last up to one year outdoors without lamination. The high white point provides colors that pop, and the coating supports an expanded color gamut for hard-to-hit spot colors.
Printer/Ink Compatibility Hewlett-Packard, Canon,and Epson dye & pigment based inks. Saturation level of this product is 300% and glossy film/photo paper setting in most RIPs is appropiate. Ink Dry Time Varies with type and amount of ink, relative humidity and temperature.
Features:
- Bright white, water resistant, recyclable polypropylene film with a microporous coating for instant drying.
- Produce spectacular, brilliantly colored graphics that will last up to one year outdoors without lamination.
- High white point provides colors that pop, and the coating supports an expanded color gamut for hard-to-hit spot colors.
- Material: Polypropylene
- Caliper/Gauge: 8 mil
Specifications
| Item # | 87ABMGP-GRP |
|---|---|
| Manufacturer | Spiral |
| Manufacturer Part Number | 87ABMGP-GRP |
| Material | Polypropylene |
| Caliper/Gauge | 8 mil |
| Weight | 170 gsm |
| Color | L>97.0+1.0, a=-1.0+1.0, b=1.0_1.0 |
| Opacity | > 95% (CIE) |
| Whiteness | 85 (CIE) |
| Gloss Level | 90 |
| Ink Dry Time | Varies with type and amount of ink, relative humidity and temperature |
| Printing | 60-80 deg. F, 50% Relative Humidity |
| Ideal Storage Conditions | 70 deg. F, 50% Relative Humidity, store in original packaging |
| Handling Requirements | Due to absorptive nature of the coating, avoid touching the coated surface with bare skin. Always wear cotton gloves when handling inkjet-coated materials. Rolls are supplied with the coated surface wound out |
| Finishing/Lamination | A pressure sensitive vinyl laminate is recommended, to give surface protection from dirt and abrasion. Thermal laminates should not be used. Before applying laminate, allow image to dry for 24 h |
| Shelf Life | 1 year from ship date when stored in proper conditions |
Reviews
Write Your Own Review
Frequent Asked Questions
Submit a New Question
