Pro-Lam PL244WF 44" Laminator w/ Stand & Castors [3" Core]

Pro-Lam PL244WF 44" Laminator w/ Stand & Castors [3" Core]
17999.000000 NewCondition InStock

Pro-Lam PL244WF 44" Laminator w/ Stand & Castors [3" Core]

Item #: 04PL244WF
Brand: ProLam


The PL-244WF wide format 44" laminator will run all types of thermal laminating films up to 10 mil thick. It is capable of laminating at speeds up to 7 feet per minute and can mount boards up to a 3/16".

The PL 244WF has a warm up time of about 6 minutes, simply turn it on when you need it. It is well suited for applications using heat activated adhesive foam board and running thermal laminating to produce a mounted and laminated piece all done in just one pass. The silcone heated rollers provide superior scratch and stretch free finish. Designed for the ease of operation and superior finish of applications requiring 44" wide format lamination, this is an excellent laminating machine.

The standard PL-244WF includes a stand with casters, and 3" mandrels. Options are available such as|||additional mandrels with 1" or 3" cores, slitters and a release liner take up winder for using pressure sensitive films.


  • 44" Wide Format Lamination
  • Patented Rollers, Warm Up 6 min.
  • Laminates all film grades ~10.0 mil
  • Variable Speed Control, Reversible
  • Laminates/Mounts Thru 3/16" Thick
  • 12"dia.+ Film Roll Capacity
  • Digital Temperature Read Out and Control
  • Three Cooling Fans
  • Ultra Duty Welded Steel Stand Standard
  • 3" Mandrels Standard

Note: These units are rated for light to medium duty use and are not recommended for a large volume industrial setting. The use of this machine in that environment can result in damage to the rollers that will not be covered under the warrantee.


Item #04PL244WF
Brand NamePro-Lam
Manufacturer Part Number04PL244WF
Speed Max Mechanical Speed7 fpm
Maximum Sustained Lamination Speed1.2 Mil @ 230 degrees 7fpm / 3 Mil @250 Degrees 5 fpm
Max Film Thickness 10.0 Mil
Max Substrate Thickness 3/16"
Cooling Fans4 @ 110 CFM ea. = 440 cubic feet per minute
Warm Up Time Less Than. 5 min.
Max Film Roll Diameter11" with 1.5 mil & stand
Gapable rollsYes-Front Heat and Rear Pull Rollers
Temp Controls Solid State - Digital Readout 2 degree hysteresis
Motor / Speed Control DC High Torque Gear Motor / Solid State Variable, Both Air Cooled
Slitters Optional
Heated Roll Watts 2400 ea 4800 combined, X BTU's
Electrical Requirements 240 Volt 60 Hz 21 Amps/2,800 Watts / Dedicated 30 Amp Circuit
Dimensions 55"W x 20"D 16"H -w/o stand 40"H-w/ stand
Shipping Dimensions2 Packages Laminator 18" x 60" x 20" / Stand 23" x 33" x 8"
Weight Laminator and Stand300 lbs
Shipping Weight Laminator230# Stand 70#


Write Your Own Review
You're reviewing:Pro-Lam PL244WF 44" Laminator w/ Stand & Castors [3" Core]
Your Rating

Frequent Asked Questions

Submit a New Question