Sorry, but ALM 3222 Laminator & Stand 1 /Each (Discontinued) is no longer available to buy.
We think you might like one of these instead:
ALM 3222 Laminator & Stand 1 /Each (Discontinued)
- Speed: Variable speed of up to 68" per minute
- Warm-Up Time: Approx. 5 minutes
- Temperature Range: 170-270
- Maximum Thickness: 20 lb bond - 130lb cover
- 180 Day Manufacturer Warranty
Description
The Fujipla ALM 3222 Automatic Laminator will automatically feed, laminate and trim Digital Prints virtually unattended, freeing you to work on other profitable tasks. This compact automatic laminator is as easy to use as a copy machine and warms up in 5 minutes. Just load from 1 to 200 documents in the automatic feeder and press the start button. Each document is automatically fed into the laminator, laminated with the special lamination film, trimmed to size and then stacked on the collection tray.
The Fujipla ALM 3222 fully automatic laminator is the next generation in automatic laminating, the ALM 3222 offers upgrades from the original ALM 3220. Upgrades include:
- Heated rollers for crystal clear scratch free laminations
- Micro adjustable side trimmers for precise flush cutting or exact border encapsulation
- Runs 13" wide sheets with 12.6" wide film coverage
- Built in long mode operation for banner length prints
- A 25% increase in speed over the ALM 3220
Main Features :
- Small Foot Print – less than 4 sq. ft.
- Portable – locking roller casters
- 115 Volt, 15 amp service with economy mode
- Ultra quick warm up of less than 5 minutes
- Virtually Unattended Operation
- Digital Sheets sizes: 13”x19”, 12”x18”, 11”x17”, 11”x 8.5”*
- Operating with built in long mode allows sheets of infinite length to be laminated
- Automatically feeds up to 200 sheets
- Monthly duty: 40,000 letter size sheets
- Laminates copy paper or as heavy as 130# cover stock
- Trimming Methods 2 modes – Flush trim or edge seal for all 4 sides of the print
- Operation Panel LCD display for start, stop, temperature, speed, and leading and trailing trim settings
- Automatic two side lamination or short one side work
- Automatic Flush or Sealed edge trim option micro adjustable for precise flush cut or custom encapsulation
- ALM Exclusive ASAP Roll Film - Manufactured for digital print technology with anti-static properties
- Included Accessories Stand with Film waste box, Printed operations manual and CD
- Manufacturers Warranty: 180 Day Manufacturer's Warranty (Extended Warranties Available)
- UL Approved
*Note: These are the only sheet sizes that are supported, The side trimmers will only cut 11", 11-1/4", 12" & 12-1/4" width sheet sizes.
Specifications:
- Model No.: ALM 3222
- Laminating Speed: 20"- 68"/min.
- Temperature Range: 170-270°F
- Ultra Fast Warm-Up Time: Approx. 5 minutes
- Thickness of Objects: 20 lb bond - 130lb cover
- Paper Feeding Capacity: 200 sheets, Adjustable Paper Guide
- Applicable Sizes: Letter Paper Size 8.5" x 11"; Paper Size 13" x 19"; Paper Size 12" x 18"; Tabloid Paper Size 11" x 17"
- Trimming Methods: (2 modes) Flush trim or edge seal for all 4 sides of the print
- Operation Panel: LCD display for start, stop, temperature, speed and trim settings, leading and trailing edge side cuts are adjustable
- Other Features: Laminated sheet counter; Film tension control, Roller gap lever, Paper thickness adjustment lever, Automatic stop at end of film, Power saving mode, Emergency stop function
- Power Consumption: 900W
- Power Supply: AC 120V (60Hz)
- Net Weight: Laminator: 130 lbs. Stand: 48.5 lbs.
- Included Accessories: Stand with film waste box, Printed operations manual
Specifications
Item # | 04DLALM3222 |
---|---|
Manufacturer | Fujipla |
Manufacturer Part Number | ALM3222 |
Included Supplies & Accessories | Stand with film waste box Printed operations manual |
Compatible Supplies | Uses ALM Exclusive ASAP Roll Films |
Power Voltage | AC 120V (60Hz) |
Speed | Variable speed of up to 68” per minute |
Manufacturer's Warranty | 180 Day Manufacturer's Warranty (Extended Warranties Available) |
Operation | Electric |
Double-Sided Lamination | Yes |
Single-Sided Lamination | Yes |
Thermal Laminating | Yes |
Speed | Variable speed of up to 68” per minute |
Warm-Up Time | Approx. 5 minutes |
Temperature Range | 170-270°F |
Maximum Thickness | 20 lb bond - 130lb cover |
Shipping Weight (lbs) | 132 |
Product Weight (lbs) | 130 |
Videos
Additional Videos
ALM Film: Inserting Film
Ask The Expert: What thickness laminating film will it run?
Ask The Expert: What finishes on the laminating film are available?
Ask The Expert: What are the power requirements?
Ask The Expert: Do I need to stand by the laminator and monitor lamination
Ask The Expert: What makes the ALM system unique from other laminators?
Ask The Expert: Can I cut, fold or crease the sheets after lamination?
Ask The Expert: What size sheets can the system run?
Ask The Expert: How long does it take the machine to warm up?
Ask The Expert: Will the ALM laminating film adhere to digital color prints?