Rosco 371 Three Hole Paper Drill 1 /Each (Discontinued)

The Rosback Rosco 371 3-Spindle Paper Drill has the same features of the Model 370 Paper Drill but is equipped with an expanded table. The Model 371 Paper Drill converts easily to single-hole drilling and the self-locking table stops expand the capability of alternate drilling patterns for increased flexibility of operation. Perfect choice for your finishing equipment needs. Optional floor stand is available.

The Rosco 371 has a fixed spacing 3-Spindle drill capable of drilling a full two inches of stock in a single stroke with extreme accuracy thanks to the fixed position drill heads. The Model 371 paper drill converts easily to single-hole drilling, and the Self-Locking Table Stops expand its capability to almost any hole pattern.

A simple vertical adjustment allows drills of different lengths to be used. The high compression "Hold-Down" Stripper Bar along with a fixed 4-1/4" drill spacing maintains accuracy and eliminates spacing errors. Drill a full 2 inches of stock in a single stroke with speed and accuracy. A Locking Back Gauge makes margin adjustments quick and easy. The heavy-duty 3/4-hp motor powers the spindles with a poly-v-belt drive and it is equipped with automatic waste chip ejection. A large table provides ample work space and an optional Floor Stand is available for added convenience.

The Rosco 371 3-Spindle drill puts increased drilling capacity and flexibility within reach for a variety of users, including commercial, in-plant and quick printers, offices, churches, schools, government facilities, and mailrooms.

Features:

• 2" Stock Capacity
• Comfortable Hand Lever Operation
• Rugged Construction
• Sealed Bearings
• Locking Back Gage
• Vertical Head Adjustment
• Fast Setup and Change-Over
• Automatic Chip Ejection
• Heavy-Duty 3/4 HP Motor

Standard Equipment Included with Drill:

• 3 – 1/4” Paper Drills
• 3 – Drill Blocks
• 1 – Clean-out Pin
• 1 – Drift
• 1 – Drift Lever
• 1 – Drill Lubricant Stick
• 1 –Tool Kit

Optional Equipment:

• Drill Stand - Fits both 370 and 371 model drills
• Table Extensions - for use only with model 370

Available Drill sizes:

• 1/8 dia. (3.2mm)
• 5/32 dia. (4mm)
• 3/16 dia. (4.8mm)
• 7/32 dia. (5.6mm)
• 1/4 dia. (6.3mm)
• 9/32 dia. (7.1mm)
• 5/16 dia. (7.9mm)
• 11/32 dia. (8.7mm)
• 3/8 dia. (9.5mm)
• 13/32 dia. (10.3mm)
• 7/16 dia. (11.1mm)
• 1/2 dia. (12.7mm)