SealerSales W-220DT 8" Direct Heat Foot-Operated Sealer [15mm PTFE Coated Mesh Seal]

The SealerSales W-220DT 8" Direct Heat Foot-Operated Sealer is equipped with 15mm PTFE coated MESHED seal bars and can seal materials up to 8" wide and 20mil thick. It can seal a variety of thermoplastic materials, including coated aluminum foil, Kraft paper, cellophane, polypropylene, poly-nylon, and other thicker materials. This sealer has a German-made thermostat that precisely regulates the temperature between 30°- 550° F (0°-300° C). Due to the simultaneous heating of both jaws, thicker materials can be sealed with greater heat penetration. This SealerSales W-220DT 8" Direct Heat Foot-Operated Sealer features a 26" high pedestal stand, an adjustable work table, and safety guard rails around the jaws.

Features:

• Can seal materials up to 8" wide and up to 20mil thick
• Equipped with a German manufactured thermostat that accurately controls the temperature from 30°-550° F (0°-300° C).
• Both jaws are heated simultaneously so there is better heat penetration to seal thicker materials.
• Includes an adjustable work table.
• The pedestal stand is 26" high.
• Easy to operate:
  Set the temperature on the thermostat or the thermo-controller depending on the material to be sealed. Once the correct setting has been reached, consistent seals will be maintained automatically. Insert the material between the two sealing bars. Press down on the footboard and release.