Water Proof Block-Out Scrim Banner Vinyl
- Matte finish blockout scrim
- Has a layer of tear resistant fabric embedded between two layers of bright white.
- Scratch resistant
- Waterproof, scrim vinyl, the printed side does not show through.
Description
Water-Proof 14 mil Blockout Scrim Banner is a true blockout scrim banner for outdoor graphics. This matte finish blockout scrim has a layer of tear resistant fabric embedded between two layers of bright white, scratch resistant, waterproof, matte, scrim vinyl, the printed side does not show through. It is super strong and opaque, making it a great choice for outdoor signage.
Printer/Ink Compatibility: Ink saturation of this product is 250% and heavy coated papersetting in most RIPs is appropriate. Pigmented-based inks enhance both water and ultraviolet resistance levels. Dye based inks, while maintaining excellent vibrancy, show a slightly lower ultraviolet resistance. Over saturation with dye based inks may result in image degradation. Product can be printed on Encad/Kodak (pigmented inks only), Hewlett-Packard DesignJet (2xxx/3xxx/5xxx), ColorSpan Displaymaker (pigmented ink only,) Epson Stylus Pro (7xxx/9xxx), Mimaki JV4 (pigmented inks only) and Roland Hi-Fi Jet (pigmented inks only).
Note: For best results use pigmented inks.
Features:
- Matte finish blockout scrim
- Has a layer of tear resistant fabric embedded between two layers of bright white.
- Scratch resistant
- Waterproof, scrim vinyl, the printed side does not show through.
- super strong and opaque, making it a great choice for outdoor signage.
Specifications
Item # | 87KCBAN-GRP |
---|---|
Manufacturer | Spiral |
Manufacturer Part Number | 87KCBAN-GRP |
Material | Black-Out Scrim Banner |
Caliper/Gauge | 14 mil |
Opacity | 100% |
Whiteness | 108 |
Gloss Level | 2.6 (avg) @ 60° |
Ink Dry Time | Varies with type and amount of ink, relative humidity and tempurature |
Environment | |
Printing | 60-80 deg. F, 50% Relative Humidity |
Ideal Storage Conditions | 70 deg. F, 50% Relative Humidity, store in original packaging |
Handling Requirements | Due to absorptive nature of the coating, avoid touching the coated surface with bare skin. Always wear cotton gloves when handling inkjet-coated materials. Rolls are supplied with the coated surface wound out |
Life Expectancy | Outdoor - up to 1 year without lamination with pigmented inks Outdoor - up to 6 months without lamination with pigmented inks Outdoor - up to 1 year without lamination with pigmented inks |
Finishing/Lamination | A pressure sensitive vinyl laminate is recommended, to give surface protection from dirt and abrasion. Thermal laminates should not be used. Before applying laminate, allow image to dry for 24 hours |