Walk & Wall Ink Jet Graphics 48" x 164'
- A textured, non-slip vinyl with repositionable adhesive
- For interior and exterior floor and wall graphics
- NO lamination needed – just print and apply!
- Fabric backing provides dimensional stability and strength.
Description
Walk & Wall Ink Jet Graphics is a textured, non-slip vinyl ideal for interior and exterior floor and wall graphics. This printable textured PVC does not require further lamination, it is ready for application right after printing. Fabric backing creates dimensional stability and strength making it suitable for tradeshows, POPs, sidewalk graphics, and interior and exterior directional floor and wall Graphics. Installation is easy and is more manageable, it has room for adjustments because it is repositionable during initial installation. The material lasts up to 3 years on vertical surfaces when used indoors. When used outdoors, it can last up to 1 year on vertical surfaces under normal conditions. It removes cleanly and does not leave any residue.
- Applications
- Tradeshows (Concrete, Carpet & Wall Graphics)
- POP (Floor & Wall Graphics)
- Sidewalk Graphics
- Interior and Exterior Directional Floor and Wall Graphics
- Printing Methods
- Digital - Solvent, Eco-Solvent, UV, & Latex
- Screen Print
- Advantages
- True Multi-Use Material for Interior and Exterior Surfaces
- Fabric Backing Creates Additional Dimensional Stability
- Inherent Textured Surface Means NO Lamination
- Repositionable for Easy Install
- Removes Cleanly up to 6 Months without Residue
Specifications
Item # | 87CGWW48164 |
---|---|
Manufacturer | Continental Graphix |
Manufacturer Part Number | WALK&WALL-48X164 |
Material | |
Face Film: Printable White Textured PVC | |
Back Side: White, Textile | |
Adhesive: Repositionable Solvent Acrylic | |
Liner: Polyethylene-Coated | |
Film Thickness: 12 mil (300µ +/- 5µ) | |
FR Certification: ASTM E84, M1, B1 | |
Slip Rating: ANSI A137.1/A326.3, 67212F, R12 | |
Durability | |
Interior: Up to 3 Years – Vertical Surfaces Up to 3 Months – Flooring Surfaces, Dependent on Traffic |
|
Exterior: Up to 1 Year - Vertical Exposure under Normal Conditions Up to 3 Months – Ground Surfaces, Dependent on Traffic |
|
Environment: Humidity & Solvent Resistance – Good | |
Shelf Life: 1 Year | |
Storage Requirements: Store at 59°F to 68°F (+15°C to +20°C) and Relative Humidity between 40% to 65% | |
Repositionable: Yes – During Initial Installation | |
Application/Removal | |
Application Temp: +25°F to +86°F (+10C to +30°C) | |
Service Temp: +0°F to +122°F (-17°C to +50°C) | |
Removability: Clean Removal with No Adhesive Residue, up to 6 Months – Adhesion May Increase over Time |
|
Removal Temp: +50°F (+10°C) or Greater | |
Exclusions: NOT To Be Applied On Fresh Paint, Polycarbonate, and Some PVC (No Exhaustive List Available) |