Walk & Wall Ink Jet Media 48" x 84'
- A textured, non-slip vinyl with repositionable adhesive
- For interior and exterior floor and wall graphics
- NO lamination needed – just print and apply!
- Fabric backing provides dimensional stability and strength.
Description
Install graphics on walls and floors with Walk & Wall Ink Jet Media. This media is suitable for both indoor and outdoor use. It has a textured surface that does need lamination, thus cutting time and cost. The fabric backing adds dimensional stability for excellent printing results. The material is versatile in creating visually appealing tradeshow graphics, floor and wall POPs, sidewalk graphics, and directional floor and wall graphics. It is perfect for digital and screen printing with solvent, eco-solvent, UV, and latex. Installation of media is easy; it is repositionable during initial installation to make the application precise and perfect. Removal is clean as it does not leave adhesive residue when removed within six(6) months.
- Applications
- Tradeshows (Concrete, Carpet & Wall Graphics)
- POP (Floor & Wall Graphics)
- Sidewalk Graphics
- Interior and Exterior Directional Floor and Wall Graphics
- Printing Methods
- Digital - Solvent, Eco-Solvent, UV, & Latex
- Screen Print
- Advantages
- True Multi-Use Material for Interior and Exterior Surfaces
- Fabric Backing Creates Additional Dimensional Stability
- Inherent Textured Surface Means NO Lamination
- Repositionable for Easy Install
- Removes Cleanly up to 6 Months without Residue
Specifications
Item # | 87CGWW4882 |
---|---|
Manufacturer | Continental Graphix |
Manufacturer Part Number | WALK&WALL-48X84 |
Material | |
Face Film: Printable White Textured PVC | |
Back Side: White, Textile | |
Adhesive: Repositionable Solvent Acrylic | |
Liner: Polyethylene-Coated | |
Film Thickness: 12 mil (300µ +/- 5µ) | |
FR Certification: ASTM E84, M1, B1 | |
Slip Rating: ANSI A137.1/A326.3, 67212F, R12 | |
Durability | |
Interior: Up to 3 Years – Vertical Surfaces Up to 3 Months – Flooring Surfaces, Dependent on Traffic |
|
Exterior: Up to 1 Year - Vertical Exposure under Normal Conditions Up to 3 Months – Ground Surfaces, Dependent on Traffic |
|
Environment: Humidity & Solvent Resistance – Good | |
Shelf Life: 1 Year | |
Storage Requirements: Store at 59°F to 68°F (+15°C to +20°C) and Relative Humidity between 40% to 65% | |
Repositionable: Yes – During Initial Installation | |
Application/Removal | |
Application Temp: +25°F to +86°F (+10C to +30°C) | |
Service Temp: +0°F to +122°F (-17°C to +50°C) | |
Removability: Clean Removal with No Adhesive Residue, up to 6 Months – Adhesion May Increase over Time |
|
Removal Temp: +50°F (+10°C) or Greater | |
Exclusions: NOT To Be Applied On Fresh Paint, Polycarbonate, and Some PVC (No Exhaustive List Available) |