Drytac ReTac Smooth 75 Printable Matte White Removable Pressure-Sensitive PVC Film [3.7mil, 54" x 150']
371.290000
NewCondition
InStock
Drytac ReTac Smooth 75 Printable Matte White Removable Pressure-Sensitive PVC Film [3.7mil, 54" x 150']
Item #: 80DTRTF5415032
Brand:
Drytac
Log in for pricingor
- Printable polymeric PVC film
- Compatible with (eco) solvent, UV and latex printers
- White matte finish available
- Utilizes ReTac® ultra removable adhesive technology
Description
For your indoor wall graphic applications,Drytac ReTac Smooth 3.7mil 54" x 150' Printable Matte White Removable Pressure-Sensitive PVC Film allows you to print, remove and reposition graphics on a range of surfaces. It is a matte white polymeric printable PVC film coated with ReTac ultra-removable adhesive technology. This will allow you to design and print displays that are easy to install, remove and reposition graphics without damaging the surface or leaving any residue. The removable vinyl provides fire resistant graphics for curved, textured or angled surfaces where public safety is a priority.
Features:
- Printable polymeric PVC film
- Utilizes ReTac® ultra removable adhesive technology
- White matte finish available
- Compatible with (eco) solvent, UV and latex printers
Benefits:
- Ensures easy, damage-free graphic application and removal
- Adheres to most smooth surfaces and where conformability is a priority
- No adhesive residue left behind
- Can be repositioned multiple times for repeated use
- Ideal for removable posters and large format graphic applications in public areas, including airports and hospitals
- Flame resistant testing FTMS191 method 5903
Specifications
Item # | 80DTRTF5415032 |
---|---|
Manufacturer | Drytac |
Manufacturer Item # | RTF54150-3.2 |
Brand | Drytac |
Size | 54" x 150' |
Film | Matte White Polymeric PVC |
Adhesive | ReTac ultra removable and re-positionable adhesive |
Release Liner | 143 gsm 2 Side PE Coated, 1 Side Solventless Siliconized Fine Paper |
Film Thickness | 3.2 mil (80µ) |
Adhesive Layer | 1 mil (25µ) |
Film/Adhesive Ratio | 3.2:1 |
UV Protection Factor | Not Applicable |
Outdoor Durability | 2 years |
Application Temperature | >41°F (5°C) |
Service Temperature Range | -4°F to 149°F (-20°C to 65°C) |
Shelf Life | Use within 1 year after opening original box |
Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Reviews
Write Your Own Review
Technical Data
ReTac Smooth 3.2 is a 3.2 mil (80µ) printable matte white polymeric PVC film with ReTac ultra removable adhesive. The adhesive is protected by a solventless fine paper coated on both sides with PE and siliconized on the release side. This high quality, ink receptive printable vinyl was specifically developed for easy application and removal of vibrant graphics to a wide range of substrates. ReTac® Wall can be easily applied, re-positioned and removed without surface damage or loss of adhesion.
Typical Applications
Print Compatibility
Product Structure
Physical Characteristics
Overlaminate Recommendations
When using ReTac Smooth 3.2, an overlaminate can be used for maximum life expectancy. Products recommended for use with ReTac Smooth 3.2 are Drytac’s Interlam Pro overlaminates.
Installation Recommendations
Please see Wall Graphic Installation & Removal Instructions for further details. The surface must be clean and smooth and free of defects before application.
Typical Applications
- Ideal for removable wall decals, appliques and wall murals.
- Suitable for use on most indoor surfaces, painted walls, melamine, glass, and low surface energy substrates.
- For best results, leave a 0.25” (6mm) non-printed border around the edge of the image.
Print Compatibility
- (Eco) Solvent
- Latex
- UV
Product Structure
Film | Matte White Polymeric PVC |
---|---|
Adhesive | ReTac ultra removable and re-positionable adhesive |
Release Liner | 143 gsm 2 Side PE Coated, 1 Side Solventless Siliconized Fine Paper |
Physical Characteristics
Film Thickness | 3.2 mil (80µ) |
---|---|
Adhesive Layer | 1 mil (25µ) |
Film/Adhesive Ratio | 3.2:1 |
UV Protection Factor | Not Applicable |
Outdoor Durability | 2 years |
Application Temperature | >41°F (5°C) |
Service Temperature Range | -4°F to 149°F (-20°C to 65°C) |
Shelf Life | Use within 1 year after opening original box |
Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Overlaminate Recommendations
When using ReTac Smooth 3.2, an overlaminate can be used for maximum life expectancy. Products recommended for use with ReTac Smooth 3.2 are Drytac’s Interlam Pro overlaminates.
Installation Recommendations
Please see Wall Graphic Installation & Removal Instructions for further details. The surface must be clean and smooth and free of defects before application.