Drytac Dynamic Plus Sand Pressure-Sensitive Overlaminating Film
90.190000
226.490000
2
Drytac Dynamic Plus Sand Pressure-Sensitive Overlaminating Film
Brand:
Drytac
- Size: Choose Above
- Film: Matte Sand Textured Monomeric Soft Calendared PVC
- Adhesive: Acrylic (Pressure Sensitive)
- Film Thickness: 3.2 mil (80µ)
Quote Below
Description
These IMAGin WindowVIEW Cling Gloss Vinyl Print Media are soft high gloss flexible white or clear vinyl film which self-adheres to any smooth glass surfaces such as windows office doors display cases and even beverage coolers. This vinyl film will also cling to many smooth, glossy plastic and shiny metal surfaces. These print media are suitable for Latex, solvent and UV inkjet printing.
- Features and Benefits:
- Recommended for laminating mounted prints that will be placed in high traffic indoor and outdoor display areas.
- Provides UV protection for outdoor graphics.
- Ideal for tradeshow graphics, POP displays, mouse pads, counter mats, event signage, floor graphics, and other signage where a scuff-resistant finish is required.
Specifications
| Item # | DPS3.2PSOF |
|---|---|
| Manufacturer | Drytac |
| Size | 61" x 150' |
| Film | Matte Sand Textured Monomeric Soft Calendared PVC |
| Adhesive | Acrylic (Pressure Sensitive) |
| Release Liner | 1 Side PE Coated, 1 Side Siliconized Kraft |
| Film Thickness | 3.2 mil (80µ) |
| Adhesive Layer | 1 mil (25µ) |
| Film/Adhesive Ratio | 3.2:1 |
| UV Protection Factor | Film contains UV stabilizers, which prevent film degradation and provide UV protection to the underlying image |
| Outdoor Durability | 2 years |
| Service Temperature Range | -4°F to 203°F (-20°C to 95°C) |
| Shelf Life | Use within 1 year after opening original box |
| Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Reviews
Write Your Own Review
Technical Data
Dynamic Plus Sand is a 3.2 mil (80µ) monomeric soft calendared PVC laminating film with a matte sand textured finish, coated on one side with a pressure sensitive acrylic adhesive that is protected by a Kraft release paper that is PEcoated on one side and siliconized on the release side.
Typical Applications
Physical Characteristics
Process Settings
Typical Applications
- Recommended for laminating mounted prints that will be placed in high traffic indoor and outdoor display areas.
- Provides UV protection for outdoor graphics.
- Ideal for tradeshow graphics, POP displays, mouse pads, counter mats, event signage, floor graphics, and other signage where a scuff-resistant finish is required.
| Film | Matte Sand Textured Monomeric Soft Calendared PVC |
|---|---|
| Adhesive | Acrylic (Pressure Sensitive) |
| Release Liner | 1 Side PE Coated, 1 Side Siliconized Kraft |
Physical Characteristics
| Film Thickness | 3.2 mil (80µ) |
|---|---|
| Adhesive Layer | 1 mil (25µ) |
| Film/Adhesive Ratio | 3.2:1 |
| UV Protection Factor | Film contains UV stabilizers, which prevent film degradation and provide UV protection to the underlying image |
| Outdoor Durability | 2 years |
| Service Temperature Range | -4°F to 203°F (-20°C to 95°C) |
| Shelf Life | Use within 1 year after opening original box |
| Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Process Settings
| Equipment Type | Temperature | Speed |
|---|---|---|
| Roller Laminator | Room temperature to 104°F (40°C) | 1 ft to 8 ft (0.3m to 2.5m) per minute |
| Press | Not recommended | |
Frequent Asked Questions
Submit a New Question
