Sorry, but Drytac MHL Scribe Low Temp Dry Erase Laminating Film [3mil, 51" x 500'] (Discontinued) is no longer available to buy.
We think you might like one of these instead:
Drytac MHL Scribe Low Temp Dry Erase Laminating Film [3mil, 51" x 500'] (Discontinued)
- Film Finish: Gloss
- Core Size: 3"
- Film Thickness: 3.0mil
- Hot or Cold: Hot
Description
Drytac MHL Scribe 3mil 51" x 500' Low Temp Dry Erase Laminating Film is an economical thermal overlaminating film with a dry-erase gloss finish. It can be written on with black dry-erase markers and wiped clean with a dry cloth. It is co-extruded for a carefully balanced ratio of polyester film to adhesive. Its adhesive is designed to activate between 190 and 220 degrees Fahrenheit. To minimise photo fading and prevent moisture exposure, this overlaminate has been specially designed with UV inhibitors. This product Suitable for both single sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
Features:
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
- Incorporate UV absorbers for excellent protection from damaging UV rays.
Specifications
Item # | 80DTMS51503 |
---|---|
Manufacturer | Drytac |
Manufacturer Item # | MS51503 |
Brand | Drytac |
Film Width | 51" |
Film Length | 500' |
Film Thickness | 3.0mil |
Core Size | 3" |
Finish | Dry-erase Gloss |
Base Film | 0.75mil (19 micron) |
Adhesive | 2.25 mil (56 micron) polyethylene copolymer |
Initial Tack | None |
Application Speed | 2' - 10' per minute |
Application Temperature | 210 F - 240 F |
Release Liner | None |
Reviews
Tips and Technical Data
Tips For Applying MHL UV Thermal Films:
- Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down.
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Use your idler bar to increase the area of contact between the heated rollers and the film.
- To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results.
- MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
Technical Data
MHL Scribe is a 3 mil (75µ) high clarity, abrasion-resistant PP thermal laminating film with a gloss fi nish. The film is engineered with a specially formulated copolymer thermal adhesive for a low melt-point for single-sided lamination. With its dry erase characteristics, black dry erase markers can be wiped clean with a dry cloth.
Typical Applications
- Ideal for laminating book jackets, report covers and other specialty applications.
- Suitable for courtroom displays.
- Can be used for short-term dry erase boards.
Physical Characteristics
Film Thickness | 3 mil (75µ) |
---|---|
Film/Adhesive Ratio | 0.5:2.5 |
Processing Temperature | 210°F to 230°F (99°C to 110°C) |
Shelf Life | Use within 1 year after opening original box |
Storage Conditions | 59°F to 72°F (15°C to 22°C);50 - 55% Relative Humidity |