On-A-Roll Lifter - Low Profile Model 1 /Each

On-A-Roll Lifter - Low Profile Model 1 /Each
2043.000000 NewCondition InStock

On-A-Roll Lifter - Low Profile Model 1 /Each

Item #: 04KCOARL61574
Brand: Keencut


The Foster On-A-Roll Lifter Low Profile is designed specifically for sign makers and other businesses with the need to handle wide or heavy media rolls. It enables users to quickly and effortlessly lift media up to 660 lbs, 16' wide and 15.75" in diameter. It is featured with ergonomic pull bar allows users to maneuver around tight corners and through narrow passages. The Foster On-A-Roll Lifter Low Profile will save your back. No more pulling, heaving or hefting of oversized roll media because you can easily lift heavy or wide rolls associated with today’s larger and faster print runs.

The Low-Profile version offers a 3.25" clearance of the bottom fork, it’s a perfect complement to HP Latex 3000, 3100, and 3500 printers. It has a cut out in the tray for easy maneuvering around floor mounted brackets and the small front castors reduce the front fork height. The On-A-Roll Lifters® sturdy steel construction allows what was once a two-person job to be manageable by just one, allowing a single employee to safely handle over-sized and heavy media. It will also avoid costly and dangerous mishandling mistakes that result in damaged media. This Foster On-A-Roll Lifter Low Profile is backed by a 2-year warranty on hydraulics and media tray, and 5-year warranty on cross bars.


  • Nylon safety straps allow solo users to pull media rolls of up to 660 lbs. into the securing tray for transport.
  • The easy-to-use foot pump allows users to raise the material for transport with minimal effort, reduces on-the-job injuries
  • Concave trough design of the media tray stabilizes rolls for transport.
  • 360° heavy-duty rotating and locking casters enable maneuvering through standard doors and narrow passages.
  • Solid steel handle extension provides additional control for the user to maneuver materials in tight spots.
  • Slide your media rolls right up to the printer for efficient loading.
  • Tray cut out for easy maneuvering around floor mounted brackets
  • Small front castors reduce the front fork height
  • User-friendly operation avoids costly and dangerous handling mistakes that damage media 
  • Single-person operation saves labor and time
  • Designed to operate even in shops with limited floor space
  • Rugged construction ensures long lifter life
  • Newly updated ergonomic pull bar and stronger media tray
  • 2-year manufacturer's warranty on all wheels, hydraulics and media tray / 5-years on cross bars.


  • Roll Weight Capacity: 600 lbs
  • Lift Height: 33" H
  • Max. Roll Width: 16'5"
  • Max. Roll Diameter: 15.75"
  • Dimensions: 47" H x 44" W x 33.6" D
  • Bottom Fork Clearance: 3.25"
  • Weight: 188 lbs.


Item #04KCOARL61574
Manufacturer Part Number61574
Compatible SuppliesVarious Rolls of Media (Laminating Film, Mounting Adhesive, Magnetic Rolls, Shrink Wrap Film, etc)
Dimensions47" H x 44" W x 33.6" D
Manufacturer's Warranty2 Year Warranty / 5 Years on Cross Bars
Product Weight (lbs)188
Shipping InformationThis item ships via Truck (Common Carrier). It is the responsibility of the Consignee (receiver) to remove the product from the truck. If you do not have a loading dock or any other means to lift the freight off the truck and/or you need assistance bringing the product inside of your location please call (866) 537-2244. Click here for full details.


Foster On-A-Roll Lifter


Write Your Own Review
You're reviewing:On-A-Roll Lifter - Low Profile Model 1 /Each
Your Rating

Frequent Asked Questions

Submit a New Question