Drytac Interlam Pro Emerytex UV Pressure-Sensitive Overlaminating Film [5mil, 61" x 150'] - Roll
- Matte PVC overlaminates with a pebble texture finish
- Film Width: 61"
- Film Thickness: 5 mil
- Utilizes various acrylic adhesives (aqueous, solvent and Heatset®)
Description
Drytac Interlam Pro Emerytex UV 5mil61" x 150' Pressure-Sensitive Overlaminating Film is a non-glare, scuff-resistant PVC (vinyl) overlaminating film coated with a pressure-sensitive, aqueous acrylic adhesive. It is suitable for graphics where extensive handling may be involved, due to its scuff resistant finish and pebble texture. It offers UV protection for indoor for indoor and short-term outdoor graphics. Interlam Pro Emerytex is ideal for laminating graphics displayed in high-traffic areas. Where a scuff resistant finish is required and costs are a key factor, this film is suitable for trade show graphics, POP displays, mousepads, counter mats, event signs and other signs.
- Matte PVC overlaminates with a pebble texture finish
- Utilizes various acrylic adhesives (aqueous, solvent and Heatset®)
Features:
- Anti-slip properties make it suitable for floor graphics
- Recommended for use in medium to high traffic indoor display areas
- Ideal for tradeshow graphics, POP displays or event signage
- Low Slip Potential Rating according to EN 13036-4
Benefits:
Specifications
Item # | 80DTILT61150 |
---|---|
Manufacturer | Drytac |
Manufacturer Item # | ILT61150 |
Brand | Drytac |
Film Length | 150' |
Film Width | 61" |
Film Thickness | 5 mil |
Base Film | 100μ (4 mil) |
Film | Matte Pebble Finish, Monomeric Calendared PVC |
Adhesive | Aqueous Acrylic (Pressure Sensitive) |
Release Liner | 2 Side PE Coated, 1 Side Siliconized Kraft Paper |
Adhesive Layer | 25µ (1 mil) |
Ratio Film / Adhesive | 4:1 |
UV Protection Factor | Film and adhesive contains UV stabilizers, which prevent film degradation and provide UV protection to the underlying image |
Outdoor Durability | 3+ years |
Heat Resistance Range | 70°C-95°C (158°F-203°F) |
Peel Strength (20 min, FTM1) | 11 N/25mm |
Reviews
Technical Data
Typical Applications
- Recommended for laminating mounted prints that will be placed in high traffi c indoor and outdoor display areas.
- Provides UV protection for outdoor graphics.
- Ideal for tradeshow graphics, POP displays, mouse pads, counter mats, event signage, floor graphics, and other signage where a scuff -resistant finish is required.
- Can be combined with Drytac’s FloorTac print media to create a slip-resistant fl oor graphic for low to mid-traffic areas (up to 6 months).
Product Structure
Film | Matte Pebble Textured Monomeric Soft Calendared PVC |
---|---|
Adhesive | Acrylic (Pressure Sensitive) |
Release Liner | 2 Side PE Coated, 1 Side Siliconized Kraft |
Physical Characteristics
Film Thickness | 4 mil (100µ) |
---|---|
Adhesive Layer | 1 mil (25µ) |
Film/Adhesive Ratio | 4:1 |
UV Protection Factor | Film contains UV stabilizers, which prevent film degradation and provide UV protection to the underlying image |
Outdoor Durability | 3 years |
Service Temperature Range | -13°F to 302°F (-25°C to 150°C) |
Peel Strength (20 min, FTM1) | 11 N/25mm |
Shelf Life | Use within 1 year after opening original box |
Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Process Settings
Equipment Type | Temperature | Speed |
---|---|---|
Roller Laminator | Room temperature to 104°F (40°C) | 1 ft to 8 ft (0.3m to 2.5m) per minute |
Press | Not recommended |