Drytac WindowTac Pressure Sensitive Clear Mounting Adhesive
- Clear, double-sided mounting adhesive with an embossed release liner
- Provides additional UV protection for graphics printed with dye-based or pigmented inks
- Excellent clarity without bubbles or wrinkling
- Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee
Description
Drytac WindowTac Pressure Sensitive Clear Mounting Adhesive Film makes it simple to mount large graphics to glass. This visually clear PET film has a permanent adhesive on one side and a removable adhesive on the other. Thanks to micro-grooves in the removable adhesive that allows for easy air evacuation with a squeegee, graphics can be dry installed, cleanly removed, and easily repositioned during installation. The film contains UV stabilizers, which protect against UV degradation, and it can be used on any materials, including wide format digital technology print media. It can be repositioned up to ten times in the first 12 hours and is easily removed after 12 months with no residue.
Features:
- Clear, double-sided mounting adhesive with an embossed release liner.
- Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee.
- Excellent clarity without bubbles or wrinkling.
- Provides additional UV protection for graphics printed with dye-based or pigmented inks.
Benefits:
- Transforms any printed image into an easy-to-install window graphic or decal.
- Graphics can be dry installed, cleanly removed and easily repositioned during installation.
- Suitable for double-sided window graphics.
- Ideal for face mounting of temporary graphics to glass, acrylic and other non-porou.s surfaces.
- Ideal for short-term promotional window advertising and POP displays.
Specifications
Item # | PWD164 |
---|---|
Manufacturer | Drytac |
Brand | Drytac |
Film Length | 15' or 164' |
Film Width | 25.5" - 54" |
Release Liner | 2 Side PE Coated, 1 Side Siliconized Kraft |
Adhesive | Permanent Acrylic (Pressure Sensitive) |
Film | Visually Clear PET |
Release Liner | Embossed HDPE |
Film Thickness | 0.9 mil (23µ) |
Adhesive Layer | 1 mil (25µ) permanent 0.6 mil (14µ) removable |
Film/Adhesive Ratio | 1:0.9:0.6 |
UV Protection Factor | UV Stable |
Outdoor Durability | Not Applicable |
Service Temperature Range | -4°F to 248°F (-20°C to 120°C) |
Peel Strength (20 min, FTM1) | 22 N/25mm (permanent - glass) 3 N/25mm (removable - glass) |
Shelf Life | Use within 1 year after opening original box |
Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Reviews
Technical Data
Typical Applications
- Recommended for face mounting graphics onto glass, acrylic and other non-porous surfaces.
- Can be used for backlit displays.
- Can be re-positioned up to 10 times in the first 12 hours and cleanly removed within 12 months after application.
- Can be used on media printed with all common print technologies, including (Eco) Solvent, Latex and UV.
Product Structure
Release Liner | 2 Side PE Coated, 1 Side Siliconized Kraft |
---|---|
Adhesive | Permanent Acrylic (Pressure Sensitive) |
Film | Visually Clear PET |
Release Liner | Embossed HDPE |
Physical Characteristics
Film Thickness | 0.9 mil (23µ) |
---|---|
Adhesive Layer | 1 mil (25µ) permanent 0.6 mil (14µ) removable |
Film/Adhesive Ratio | 1:0.9:0.6 |
UV Protection Factor | UV Stable |
Outdoor Durability | Not Applicable |
Service Temperature Range | -4°F to 248°F (-20°C to 120°C) |
Peel Strength (20 min, FTM1) | 22 N/25mm (permanent - glass) 3 N/25mm (removable - glass) |
Shelf Life | Use within 1 year after opening original box |
Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Process Settings
Equipment Type | Temperature | Dwell Time |
---|---|---|
Roller Laminator | Room temperature to 104°F (40°C) | 1 ft to 8 ft (0.3m to 2.5m) per minute |
Press | Not recommended |
Prior to application, clean the mounting substrate with soap and water. Rinse thoroughly with water and wipe dry with a lintfree cloth. Window cleaners are not recommended.