Ledco Signmaster 44 1 /Each (Discontinued)

The Signmaster 44 combines the features and benefits of the well-known, Econocraft pressure-sensitive roll-applicator with the XL44 pouch mounter/laminator. The resulting hot roll Signmaster 44 conveniently and easily automates the use of transfer tape, pressure-sensitive laminates, thermal and pressure sensitive mounting boards, mounting boards with over-laminates, and thermal pouches. Fast and versatile, it takes little instruction to be up and running. The Signmaster 44 is forgiving and will apply most materials under a wide range of speed and tension settings. 

The Ledco Signmaster 44 is a heavy duty, commercial laminator designed for the most rigorous and demanding jobs and workloads. It is designed to provide quality lamination of a wide variety of papers, vinyls and other materials up to 1/2" thick using film up to 10 mils thick. 

Minimize waste and labor in today's competitive world. The cost of re-work (re-cutting, re-weeding, or re-application) can take all of the profit out of a job. Whether it is transfer tape, vinyl, acid-resistant tape, pre-mask, adhesive film, or other pressure-sensitive materials, a Signmaster 44 will put it down effortlessly with no bubbles or wrinkling, minimizing any waste of materials and labor.

Features and Benefits:

• Practical - minimize waste, save time
• Economical - low cost, minimum maintenance
• Versitile - apply any pressure-sensitive material, mount, laminate
• A release liner take-up with an adjustable clutch, takes up the release liner found on most pressure-sensitive films.
• Roller bearings, alloy construction and high quality motors insure a long and trouble-free life for these machines.
• A variable speed motor control allows operators to apply different materials to different substrates. A preset 3-function switch allows operation in variable speed modes.
• The feed tray is non-ferrous, so magnetic materials may be applied.
• The supply roll tension knobs are important, because without some supply roll tension, most films and tapes will wrinkle during application.
• A reverse drive switch makes it simple to back material out of the laminating rollers or correct material wraparound.
• A foot pedal is a standard feature that frees hands to align and feed work.
• Stand, casters and bottom supply roll is included.
• A safety shield with electronic interlock prevents operation of the machine if the guard and the feed tray are not in place, protecting operators and other employees.
• Two safety stop buttons on both sides of the machine will automatically stop the machine when the operator pushes them in.
• Correct and even lamination pressure is ensured by rubber rolls that are spring-loaded and preset. The pressure is easy to adjust if required when performing routine maintenance.