Drytac SpotOn Floor 200 Embossed White Matte Removable Pressure-Sensitive Printable PVC Film[8.6mil, 54" x 98']
503.090000
NewCondition
InStock
Drytac SpotOn Floor 200 Embossed White Matte Removable Pressure-Sensitive Printable PVC Film[8.6mil, 54" x 98']
Item #: 87DTSPOW54098
Brand:
Drytac
Log in for pricingor
- Printable slip-resistant PVC film
- Compatible with UV and latex printers
- White matte textured finish
- Utilizes a unique dot patterned removable adhesive
Description
Drytac SpotOn Floor 200 8.6mil 54" x 98' Embossed White Matte Removable Pressure-Sensitive Printable Vinyl is intended to deliver high-quality, simple-to-apply graphics to the front line and is suitable for short-term graphics application. This monomeric PVC film has a dot pattern adhesive that enables easy bubble-free application on a variety of smooth interior surfaces, including walls, windows, glass, and more. The film can be moved once it is installed and, if stored properly, can be reused. SpotOn can be printed using an inkjet printer using solvent, eco-solvent, HP Latex, or UV ink.
Features:
- Printable slip-resistant PVC film.
- Utilizes a unique dot patterned removable adhesive.
- White matte textured finish.
- Compatible with UV and latex printers.
Benefits:
- Easy, bubble-free graphic application and removal.
- Anit-slip properties make it suitable for floor graphics.
- No tools required for installation.
- No overlamination needed.
- Ideal for indoor floor graphic applications.
- Low Slip Potential Rating according to EN 13036-4.
Specifications
Item # | 87DTSPOW54098 |
---|---|
Manufacturer | Drytac |
Manufacturer Item # | SPOW54098 |
Brand | Drytac |
Size | 54" x 98' |
Film | 200µ White Matte Monomeric PVC |
Adhesive | Dot Pattern Removable Polyacrylate |
Release Liner | 135 gsm Siliconized 1 Side Bleached Clay Coated Kraft |
Film Thickness | 8 mil (200µ) |
Adhesive Layer | 0.6 mil (15µ) |
Film/Adhesive Ratio | 8.0:0.6 |
UV Protection Factor | Not Applicable |
Outdoor Durability | Internal Use Only |
Application Temperature | >41°F (5°C) |
Service Temperature Range | -4°F to 149°F (-20°C to 65°C) |
Slip Rating (Post-Printed) | R10 (According to DIN 51130:2010) |
Shelf Life | 1 year |
Storage Conditions | 64°F to 77°F (18°C to 25°C); 40 - 65% Relative Humidity |
Reviews
Write Your Own Review
Technical Data
SpotOn Floor 200 is an 8 mil (200µ) embossed printable white matte monomeric PVC film, coated on one side with a dot-patterned, removable pressure sensitive polyacrylate adhesive. The adhesive is protected by a single sided, siliconised clay coated kraft release liner. This high quality ink receptive embossed white vinyl was specifically developed for easy application. SpotOn® Floor 200 has a post-printed anti-slip rating of R10, according to DIN
51130:2010, which allows for vibrant, slip resistant floor graphics without the need for lamination.
Typical Applications
Print Compatibility
Product Structure
Physical Characteristics
Installation Recommendations
Please see SpotOn installation instructions for further details. The surface must be clean and smooth and free of defects before application.
Typical Applications
- Ideal for short-term indoor floor applications where graphics are applied to floor or ceramic tiles, sealed wood or concrete, waxed vinyl, marble, or terrazzo.
- Graphics for floor advertising as well as other promotional applications.
- Excellent for applications where easy, tool-free installation is necessary.
- Can be removed within 6 months of initial installation.
Print Compatibility
- (Eco) Solvent
- Latex
- UV
Product Structure
Film | 200µ White Matte Monomeric PVC |
---|---|
Adhesive | Dot Pattern Removable Polyacrylate |
Release Liner | 135 gsm Siliconized 1 Side Bleached Clay Coated Kraft |
Physical Characteristics
Film Thickness | 8 mil (200µ) |
---|---|
Release Liner Layer | 0.6 mil (15µ) |
Film/Release Liner Ratio | 8.0:0.6 |
UV Protection Factor | Not Applicable |
Outdoor Durability | Internal Use Only |
Application Temperature | >41°F (5°C) |
Service Temperature Range | 4°F to 149°F (-20°C to 65°C) |
Slip Rating (Post-Printed) | R10 (According to DIN 51130:2010) |
Shelf Life | 1 year |
Storage Conditions | 64°F to 77°F (18°C to 25°C); 40 - 65% Relative Humidity |
Installation Recommendations
Please see SpotOn installation instructions for further details. The surface must be clean and smooth and free of defects before application.