IMAGin WindowVIEW Cling Gloss White Vinyl Print Media [Static Cling, 8mil, 54" x 150']

This IMAGin WindowVIEW Cling 8mil 54" x 150' Gloss White Static Cling Print Vinyl is a soft high gloss flexible white vinyl film which self-adheres to any smooth glass surfaces such as windows office doors display cases and even beverage coolers. This vinyl film will also cling to many smooth, glossy plastic and shiny metal surfaces. This print media is suitable for Latex, solvent and UV inkjet printing.

• Features and Benefits:
  • Designed for any term advertisement on glass or other smooth surfaces like stainless steel.
  • Allows for optimal printability on all wide format solvent, latex and UV ink jet pritners.
  • 8 pt. liner allows for excellent lay flat and sheet ability.
  • Can be installed wet or dry by a novice installer, and always removes cleanly.
  • Lamination is not required.
  • Durability is up to six months outdoors.


• Typical Uses:
  • Restaurants
  • Arenas
  • Retail
  • Transportation Hubs
  • Convenient Stores


• Physical Properties
  
  

  Property	Typical Values	Test Method
  Thickness, inches (µm) Film Total product	0.008 (203) 0.016 (406)	ASTM-D645
  Tensile Strength (lbs.) MD CD	>18 >18	ASTM D882
  Elongation (%) MD CD	250 min 250 min	ASTM D882
  Shrinkage (%) MD CD	≥5 ≥2
  Temperature Range Minimum Application: End Use:	40°F (+10°C) 20°F to 140°F (-6°C to 60°C)



• Durability
  Up to 6 months from time of application on an outside window. Outdoor climate may limit the bond of static cling vinyl on exterior windows. Because of these uncontrollable factors no warranty is offered for durability.


• Shelf Life
  12 months from D.O.M. when stored at 60/77°F (15/25°C) and 50% relative humidity in the original package.


• Approved Print Materials:
  
  

  Screen Printing:						HP Indigo     ☐
  UV Cured     ☒						Off-set     ☐
  Solvent     ☒						Off-set UV     ☒
  Digital: UV Inkjet     ☐						Thermal Transfer     ☐
  Eco-solvent     ☒						UV Flexographic     ☒
  True solvent     ☒						Flexographic     ☒
  Latex     ☒						Jetrion     ☐

  
  
  * Flexographic Printing requires a topcoat. WVG000113 has been approved by ACTEGA Coatings and Sealants (ww.altana.com) as in-line coat-able ink primers.
  
  To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used. Profiles can be obtained from our Distributors or can be downloaded from www.mactac.com . Printer and heater settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s websites. The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of printing systems, inks and software can significantly affect output. It is the customer’s responsibility to determine the suitability of any profile for use in their


• Limitations
  
  • 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.
  • 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations.
  • 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
  
  
  


• Recommendations
  Always test your combination of WindowView products, inks and laminating films prior to commercial use.
  
  
  • a) Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. The maximum allowable ink saturation is 270%.
  • b) Drying Requirements: Solvent, Eco-solvent and Mild-solvent inkjet prints require 24 - 48 hr. drying time - open to the air. Inks do not dry when printed media is rolled up. The prints must be dry prior to rolling up for shipment.
  • c) Transportation Conditions: To allow for easy transportation, IMAGin WindowView Cling should be loosely rolled up, with the image out, with a minimum diameter of 6 inches (15cm). Make sure the print is completely dry and protected in a plastic bag. During transportation or storage, avoid exposing them to extreme temperature and humidity changes.


• • Values given are typical for unprocessed product and are not for use as specifications. Processing may change the values.