Mactac Rebel RB599R 4mil Gloss Clear Vinyl Print Media [60" x 150', Removable Adhesive]
365.890000
NewCondition
InStock
Mactac Rebel RB599R 4mil Gloss Clear Vinyl Print Media [60" x 150', Removable Adhesive]
Item #: 87MTRB599RW60L150
Brand:
Mactac
Log in for pricingor
- Wide-format and screen printable.
- Five year durability.
- Two year removability
- High-gloss face.
Description
This Mactac Rebel RB599R 4mil Gloss Clear Removable 60" x 150' Vinyl Print Media is a 4-mil soft clear gloss, polymeric stabilized PVC film designed for solvent-based ink jet printing and screen printing. The product is coated on one side with a clear removable, acrylic pressure sensitive adhesive and supplied with a 90# SuperFlat , C2S polycoated liner that provides excellent lay flat. RB599R is designed medium to long-term outdoor advertising and promotion on flat or slightly curved surfaces. Suggested uses include digitally produced or screen-printed labels, decals, markings, point-ofpurchase displays and signs for indoor and outdoor use.
- Features and Benefits:
- Wide-format and screen printable.
- Five year durability.
- Two year removability.
- High-gloss face.
- Lower initial tack.
- Stronger removable bond.
- Typical Uses:
- Screen print labels and decals.
- Window graphics.
- Point-of-purchase displays.
- Intermediate outdoor signage.
- Intermediate indoor signage.
Property | Typical Values | Test Method |
Thickness, inches (µm) Face plus adhesive Face, adhesive & liner |
0.0042 (106) 0.0120 (304) |
|
Peel Adhesion lb./in. (N/25 mm) Stainless Steel -30 min. - 24 hr. |
1.7 (7.5) 2.2 (9.6) |
PSTC-1 |
Dimensional Stability, inches (mm) 48 hours @ 158°F MD CD |
0.06 (1.5) 0.04 (1.02) |
MACtac CTM-21 (Method D) Bonded to aluminum |
Temperature Range Application: End Use: |
32° to 150°F (0° to 65°C) -40° to 200°F (-40° to 93°C) |
The outdoor durability of the unprinted film is 5 years. RB599R has up to 2 year removability from most surfaces after application. Adhesion to high energy surfaces such as glass, acrylic glass and aluminum may result in some adhesive being left behind. This can be easily cleaned off with Isopropyl alcohol.
This use-life estimate is based upon accelerated age studies. Please note that exposure to severe temperatures, ultra-violet light and also in tropical, sub-tropical or desert regions will cause more rapid deterioration. This also applies to polluted areas, high altitude and south facing exposure.
Two years when stored at 75°F (24°C) and 50% relative humidity or less.
This product has 2 year removability after application on many surfaces. The removability of RB599R may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
Screen Printing: HP Indigo No
UV Cured Yes Off-set No
Solvent Yes UV Off-set Yes
WF Digital: UV Inkjet Yes Thermal Transfer Yes
Eco-solvent Yes Flexographic* No
True solvent Yes UV Flexographic Yes
Latex Yes Narrow Web UV Inkjet Yes
* Flexographic Printing requires a topcoat. WVG000113 has been approved by ACTEGA Coatings and Sealants (ww.altana.com) as in-line coat-able ink primers. To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used. Profiles can be obtained from our Distributors or can be downloaded from www.mactac.com . Printer and heater settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s websites.
The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of printing systems, inks and software can significantly affect output. It is the customer’s responsibility to determine the suitability of any profile for use in their specific print environment.
Always test your combination of REBEL products, inks and laminating films prior to commercial use.
- 1) Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. The maximum allowable ink saturation is 270%.
- 2) Drying Requirements: Solvent, Eco-solvent and Mild-solvent inkjet prints require 24 - 48 hr. drying time - open to the air. Inks do not dry when printed media is rolled up. The prints must be dry prior to lamination.
- 3) Laminating Conditions: If the printed graphic is likely to be exposed to corrosive liquids, smoke, fumes, and highly polluted areas or there is a likelihood of scratching, it is highly recommended to laminate with Permacolor PermaGard Series (high performance) or ColorGard LUV Series (intermediate) overlaminating films.
- 4) Transportation Conditions: To allow for easy transportation, REBEL series can be rolled up, with the image out, with a minimum diameter of 6 inches (15cm). When the image is not protected by an overlaminate, make sure the print is completely dry and protected in a plastic bag. During transportation or storage, avoid exposing them to extreme temperature.
1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.
2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations.
3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
- a. Vending or dispensing machines and cooler graphics
- b. Indoor and outdoor graphics and signs
- c. Small format OEM decorative and identification graphics
- d. Windows - dry application only!
- e. For use on corrugated or complex surfaces
- f. For use over rivets
- g. For use on flexible substrates (banners, canvas, etc.)
- h. For use on painted surfaces that are not thoroughly cured or properly bonded to the substrate.
- i. Wet application
Specifications
Item # | 87MTRB599RW60L150 |
---|---|
Manufacturer | Mactac |
Manufacturer Item # | RB599RW60L150 |
Brand | Mactac |
Adhesive Type | Removable Acrylic |
Color | Clear |
Films | Vinyl (PVC) |
Finish | Gloss |
Length | 150' |
Width | 60" |
Liner Category | 90# Superflat |
Outdoor Durability | 5 Years |
Precise Program | N |
Print Method | Eco-Solvent Inkjet, Inkjet, Latex, Narrow Web UV Inkjet, Offset, Solvent Screen, Thermal Transfer, UV Cured Screen, UV Inkjet, UV Offset |
Thickness | 4.0 mil |
Reviews
Write Your Own Review