SealerSales W-450DT 18" Direct Heat Foot-Operated Sealer [15mm PTFE Coated Mesh Seal]

The SealerSales W-450DT 18" Direct Heat Foot-Operated Sealer is equipped with 15mm PTFE coated serrated seal bars and can seal materials up to 18" wide and 20mil thick. It can seal a variety of thermoplastic materials, including coated aluminium foil, Kraft paper, cellophane, polypropylene, poly-nylon, and other thicker materials. This sealer has a German-made thermostat that precisely regulates the temperature between 30°- 550° F (0°-300° C). Due to simultaneous heating of both jaws, thicker materials can be sealed with greater heat penetration. This SealerSales W--450DT 18" Direct Heat Foot-Operated Sealer features a 26" high pedestal stand, an adjustable work table, and safety guard rails around the jaws.

Features:

• Depending on the model of the sealer, material up to 18" wide and 20mil total thickness can be sealed.
• Units are equipped with a German manufactured thermostat that accurately controls the temperature from 30°-550° F (0°-300° C).
• Both jaws are heated simultaneously so there is better heat penetration to seal thicker materials.
• Our W-Series direct heat sealers include an adjustable work table.
• The pedestal stand is 26", but an optional 36" stand is also available.
• Easy to operate:
  Set the temperature on the thermostat or the thermo-controller depending on the material to be sealed. Once the correct setting has been reached, consistent seals will be maintained automatically. Insert the material between the two sealing bars. Press down on the footboard and release.