Board Trimmers
-
Safety Speed SR5UA ACM Panel Saw and Router Combo
04SASSR5UA- 3 Hp worm drive saw motor.
- 3 ¼ Hp heavy-duty router motor.
- 10 ft. Welded steel frame.
- Chrome plated 1 ¾” guide tubes.
-
Safety Speed SR5A ACM Panel Saw and Router Combo
04SASSR5A- Capabilities include making plow and cross dados as well as rabbet’s.
- Features a floating router head allowing the router to plunge into, and raise out of the panel at any time.
- Allows for accurate cutting and V-Grooving of ACM (Aluminum Composite Material) panels.
- Features a dust system in place to collect debris while cutting and routing.
-
Keencut SteelTrak 98" Vertical Sign Cutter & Accessories
- Manufactured in England to the highest quality standards.
- Built specifically for sign makers that need to cut a growing variety of complex materials.
- Features a 98" cutting length and is an upgraded version of the Excalibur cutters
- Capable of cutting through cast acrylic, aluminum composite, plexiglas, glass, foam board, aluminum sheets, and much much more.
-
Safety Speed DFC-H5 64" Vertical Panel Saw and Dust Free Cutter Combo
04SASDFCH5- 3 1/4 Hp, 15 amp industrial duty saw motor.
- Zinc plated 1 3/4" steel guide tubes.
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
-
Safety Speed SSC Dust-Free Vertical Substrate Cutter
- Offering a high degree of performance and accuracy at a cost much less than similar models in the industry.
- A truly affordable finishing solution for any sign making business.
- Designed to cut cleanly and accurately without dust and noise.
- Interchangeable tool cartridges that can be changed in under 10 seconds means that you only buy the tools you need.
-
Keencut Excalibur 3S 1 /Each
04EXCAL3S- Allows quick access to 3 cutting tools attached to cutting head (composite twin wheel cutting head, standard utility blade, scoring blade for acrylic).
- Cuts materials up to 13 mm (1/2") thick
- Auto blade disengagement
- Twin-wheel cutting system reduces noise and dust.
-
Keencut Evolution 3 Smart Fold Cutters (Many Sizes)
- Smart Fold means that the cutter quickly and easily swings down for under-bench storage
- Cutter Capacity: 1/2" Thick Stack
- Sizes are available from 44” to 200”
- Can Cut Materials: ACM (i.e. DiBond) ≤ 3mm (3/32″) Rocker tool head only, for occasional use
-
Martin Yale BT100 Banner Trimmer 1 /Each
04MYBT100- Provides a safe way to cut and trim banners
- Suits banner widths of 4" to 43"
- Accurate - cuts within a 1/16" margin
- Trim and cut banners in minutes
-
Keencut Benches for Evolution 3 SmartFold Cutter
- Direct fixing for maximum strength
- Strong, secure and stable
- Level surface adjustment
- Worktop options
-
Keencut Evolution 3 Bench Top Cutters (Many Sizes)
- Sizes are available from 44” to 200”
- Cutter Capacity: 1/2" Thick Stack
- Cutter Accuracy: 0.008"
- Can Cut Materials: Vinyl, Banner, Cardstock, Foam Core, PVC Board (10mm), Cardboard, Corrugated Plastic, Acrylic (1/4" score-and-snap), Inkjet Media, Tissue, ACM (i.e. DiBond) ≤ 3mm (3/32″) Rocker tool head only, for occasional use & More
-
Safety Speed Nemesis Integrated Large Format Desktop Cutter
- Has the functionality of the Europa cutter rail, table mount and elevators all in one unit.
- Consists of a fixed docking station that fastens with screws to an existing flat table surface.
- Can simply be lifted off the base and stored or used as a portable cutter rail.
- An integral lift mechanism on each end of the unit allows for easy material loading.
-
Safety Speed Europa Large Format Desktop Cutter
- Combines a number of interacting products which together offer a high degree of performance and accuracy at a price unmatched by similar systems.
- Unique lightweight, single extrusion design of the Europa cutter rails offers incredible rigidity which allows the cutter to span widths up to 10 feet.
- Cutting head includes a magnetic blade magazine which accepts utility blades and scoring blades.
- A 45mm textile cutting wheel and holder is also included as standard.
-
Safety Speed Artemis Safety Straight Edge
- Simple and effective solution to assist in the safe cutting of many of the materials used in today’s sign and graphic production shops.
- Essential tool for cutting, scoring and pen lining.
- Engineered in extruded aluminum and anodized for lasting protection.
- Designed to allow increased downward pressure on the clamped material while protecting fingers against any tool slippages.
-
Keencut Steel-Tip Straight Edge & Safety Ruler
- Lightweight anodized aluminum frame.
- Embedded steel edge for lasting accuracy.
- Two full-length silicone grip cords to protect and clamp your materials.
- Feature steel cutting edges that reduce wear and offer extreme accuracy.
-
Safety Speed Kronos General Purpose Cutter
- Features a strong anodized aluminum base that incorporates a narrow groove that safety and securely accepts the blade tip during cutting.
- Also features a self adjusting hinge and lift arm assembly which allows the cutter to accommodate materials longer than itself and provides flat cutting on materials up to 1/2" thick.
- The cutting head includes a magnetic blade magazine which accepts utility blades and scoring blades.
- It comes standard with a 45mm textile cutting wheel and holder, 1 acrylic score blade, and 100 utility blades
-
Keencut Graphik Blades for Sabre / Evolution 2 & 3 Cutters 100 /Box
05KC69131- 1/2" Capacity Graphik Blades (Graphix Blades)
- OEM Manufacturer-Direct for Perfect Compatibility
- Compatible with Keencut Sabre-2, Evolution E2, Javelin-2, Javelin Integra, Evolution3, SmartFold, BenchTop & FreeHand Cutters
- Sold in a Pack of 100 Blades
-
Safety Speed H10 Wheels for All Machines - 1 Pair
04SASH10- Pair of wheels for your Safety Speed machine
- Allow the machine to be moved easily when in the completely upright position.
- Two wheels are included.
- Dimensions: 15 × 3 × 14 in
-
Ultimat Gold & Ultimat Futura Blades (Pack of 100)
- Compatible with Keencut Ultimat Gold & Ultimat Futura
- Choose from several kinds of blades
- Qty: 100 Blades / Pack
-
LOGAN® FoamWerks™ Foam Board Cutters
- Choose from: Freestyle, Straight/Bevel, V-Groove, or Circle Cutter
- Cuts foam board up to 1/2" thick
- Portable & lightweight
- Great for everyone from crafters to print shops
-
Logan FoamWerks Straight Cutter 1 /Each
05AGLOWC6001- Cut perfect straight edges on any depth of foam board from 1/8" to 1/2" (3.1mm to 12.7mm).
- features adjustable blade depth, quick change blade clip, magnetic blade slot, on-board blade storage drawer and five blades.
- Use with FoamWerks Channel Rail System.
- Uses replacement blades WC-20.
-
OLFA "A-1" Cutter 1 /Each
05LIOLFA- Auto-lock blade slider
- High-impact ABS plastic handle
- Stainless steel blade channel
- Preloaded with an 9mm AB precision silver snap-off blade
-
OLFA Standard Replacement Blades, 10 pack 1 /Pack
05LIOLFAB- Standard-duty, snap-off replacement blade that has 13 cutting edges per blade.
- Made from a high quality carbon tool steel.
- Compatible Equipment: Olfa A1 Cutter
- Quantity: 10/pack
