James Burn
-
James Burn BB50H-M3 Wire-O Binding Machine and Accessories
- Wire-O Finishing up to 20" for calendars or other documents.
- Skip binding capable both with or without hangers.
- Compatible with Wire-O sizes from 1/4" to 1" diameters.
- Speed: Between 600 to 1,200 Books / Hour
-
James Burn BB520P Speedbind Automatic Wire-O Punching & Binding Machine
- Maximum sheet size of 20 1/2" x 31 1/2", minimum of 9 1/5" x 8 1/4"
- 5mm maximum punching capacity
- Easy to access and change dies/tools
- Speed: Between 1,000 to 3,000 Books / Hour
-
Dies and Accessories for James Burn DocuPunch MINI Automatic Punch
- Easily interchangeable
- Made of heavy duty tool steel
- OEM, manufacturer-direct
- 10 Punch Patterns Available
-
James Burn EPX700 Automatic Binding Punch Machine
- Paper Size: 26" x 27 1/2"
- Selectable Speeds: Up to 50 Cycles / Minute
- Maximum Punching Thickness: 4 mm
- Disengageable Die Pins: Yes (Removable Pins)
-
James Burn DocuPunch® PLUS Automatic Punch
- Running speeds of up to 76,500 sheets per hour with clean, perfect holes for finishing
- Three adjustable cycle speeds, including 50, 60, and 75 cycles per minute
- Feed Table Capacity: 5 Reams (20 lb. Bond Paper)
- Pick Thickness: Adjustable from 0.4 to 1.0 mm
-
James Burn Alpha-Doc® MK4 Automatic Punch Machine
- Feed Table Capacity: 8 Reams (20 lb. Bond Paper)
- Speed: Up to 94,200 Sheets per Hour
- Maximum Punching Thickness: 1 mm
- Castors: Yes; Lockable
-
James Burn CB30QS Automatic Coil Inserter & Crimper
- Speed: Up to 600 Books per Hour
- Compatible Coils: 8 to 20 mm Plastic Coils (up to 30mm with large coil kit)
- Paper Size: 5"-12" or 17" Binding Edge (Depending on Model)
- Choose from 12" or 17" models
-
James Burn EB Series Electric Wire Closer
- Electric wire closing eliminates hassle and creates consistent, perfectly round wires
- Choose from 14" EB3500 and 19.5" EB5000 models
- Increase efficiency of your bindery or print shop
- Simple Setup & Operation - Turn the knob to set the wire size you need to close, and just turn it again whenever you need to change sizes. Place the document with wire onto the closing table and between the clamps, and press the foot pedal to activate.
-
James Burn EX610D Duplex High-Speed Automatic Binding Punch
- 18” Feed table capacity
- Punches 125,000 sheets per hour
- Increase production and run all-day without down-time
- Choose your exit reception option
-
James Burn EX610 High Speed Automatic Punch
- Fully-automatic punch machine.
- Feed Table Capacity: 18" Thick Stack
- Speed: Up to 125,000 Sheets per Hour
- Air Compressor Requirements: 2 CFM at 40 PSI
-
Dies for James Burn DocuPunch MINI
- Easily interchangeable
- Made of heavy duty tool steel
- OEM, manufacturer-direct
- 10 Punch Patterns Available
-
Punching Dies for James Burn EX610 Automatic Punch
- Easily interchangeable
- Made of heavy duty tool steel
- OEM, manufacturer-direct
- 9 Punch Patterns Available
-
Punching Dies for James Burn EX380 Punching Machine
- Easily interchangeable
- Made of heavy duty tool steel
- OEM, manufacturer-direct
- 9 Punch Patterns Available
-
Alpha-Doc MK4 Automatic Punch (dies are not included) 1 /Each
04ALPHADOC- Punch up to 54,000 sheets per hour
- 8 Ream feed tray capacity
- Automated system with simple LCD setup
- Punch sheets 5.4x5.4 to 14x13
-
James Burn EPX700 Heavy Duty Console Punch 1 /Each
04JBEPX700- Paper Size: 26" x 27 1/2"
- Selectable Speeds: Up to 50 Cycles / Minute
- Maximum Punching Thickness: 4 mm
- Disengageable Die Pins: Yes (Removable Pins)
-
James Burn Koilmatic Tabletop Coil Inserter & Crimper 1 /Each
04JBKOILMATIC- Paper Size: 8 1/2", 11", A5, & A4 Binding Edges
- Maximum Book Thickness: Up to 5/8" Thick
- Speed: Up to 450 Books per Hour
- Setup Time: Less than 5 Minutes
-
EB3500 14"Electric Wire Closer 1 /Each
04JBEB3500- Electric wire closing eliminates hassle and creates consistent, perfectly round wires
- Choose from 14" EB3500 and 19.5" EB5000 models
- Increase efficiency of your bindery or print shop
- Simple Setup & Operation - Turn the knob to set the wire size you need to close, and just turn it again whenever you need to change sizes. Place the document with wire onto the closing table and between the clamps, and press the foot pedal to activate.
-
3:1 (6.5 x 5.5 mm) Oval Hole Die for Docupunch Mini 1 /Each - Clearance Sale
04JBDOCUM31O- Easily interchangeable
- Made of heavy duty tool steel
- OEM, manufacturer-direct
- 10 Punch Patterns Available
-
2:1 (6mm) Square Hole Die for Docupunch Mini 1 /Each - Clearance Sale
04JBDOCUM21S- Easily interchangeable
- Made of heavy duty tool steel
- OEM, manufacturer-direct
- 10 Punch Patterns Available
-
Plastic Comb Die 9/16" 8 x 3mm for Docupunch Mini 1 /Each - Clearance Sale
04JBDOCUMPB- Easily interchangeable
- Made of heavy duty tool steel
- OEM, manufacturer-direct
- 10 Punch Patterns Available
-
Looseleaf Combi Die 2/3/4 8mm Round Hole for Docupunch Mini 1 /Each - Clearance Sale
04JBDOCUMLLC- Easily interchangeable
- Made of heavy duty tool steel
- OEM, manufacturer-direct
- 10 Punch Patterns Available
-
4:1 (.2475) 4 x 5mm Oval Hole Die for Docupunch Mini - Clearance Sale
04JBDOCUM41O- Easily interchangeable
- Made of heavy duty tool steel
- OEM, manufacturer-direct
- 10 Punch Patterns Available
-
3:1 (4mm) Square Hole Die for Docupunch Mini 1 /Each - Clearance Sale
04JBDOCUM31S- Easily interchangeable
- Made of heavy duty tool steel
- OEM, manufacturer-direct
- 10 Punch Patterns Available